Open 24 hours · on site within 2 hours2-hour response
Flood Cleanup for Rye Brook Homes Along Blind Brook
Rye Brook has no Sound shoreline, but Blind Brook runs right through it, and the state rates the Brook Lane neighborhood high-risk. Our crews drive in from Harrison to pump out, dry and rebuild.
Get a Free Estimate
Tell us what happened and we'll call you back. In a hurry? Call (718) 357-9191.
- Free estimates
- Open 24 hours
Rye Brook, NY
What should I do first about a flooded house in Rye Brook?
Call Strongwater Restoration at (718) 357-9191 and leave flooded electrical equipment off. Rye Brook requires flood-damaged electrical repairs to be permitted and inspected before power is restored. Our crew comes from 111 Calvert Street in Harrison, about 7.4 road miles from Village Hall, to pump out the water, dry the structure and rebuild what the flood ruined.
Most of Rye Brook’s homes are owner-occupied houses. The village was incorporated in 1982 from the unincorporated part of the Town of Rye, and Census Bureau estimates for 2020-2024 show 84.7% of occupied homes owned by the people living in them, 63.2% of units in detached single-family houses and a median construction year of 1965. Even so, about 71% of units predate 1980, so a flood repair can still run into asbestos or lead paint.
Housing: U.S. Census ACS 5-year estimates. Distance is approximate.
About Rye Brook
Which Rye Brook neighborhood does the state rate high-risk for flooding?
The Brook Lane neighborhood beside Blind Brook. New York State’s Resilient NY study of the brook lists it among six high-risk areas and recommends floodplain benches at Wyman Avenue and Brook Lane. The village held a flood mitigation update for Brook Lane and Wyman Street residents on December 9, 2021, and keeps its flood studies on file.
The Bowman Avenue Dam stands inside the village. A sluice gate built there by the county, Rye, Rye Brook and the state was finished in July 2013 to cut Blind Brook’s flows and add storm storage, and the state’s Resilient NY fact sheet lists further recommendations. The village also holds a March 2008 study of the dam site and Lower Pond and an April 2021 Army Corps flood risk study of the brook.
Rye Brook’s flood code also counts repeat losses. Under Chapter 130, flood damage on two occasions within 10 years that averages 25% of market value is substantial damage, and improvements are added up over 10 years against a 50% threshold. A second flood can push a house past that line sooner than its owner expects.
The village covers 3.5 square miles, all of it land. The Hutchinson River Parkway runs through the north, I-287 and I-95 through the south, and part of Westchester County Airport sits at the northern edge. Without a Metro-North station, the village is served by Bee-Line buses, and Ward’s Castle, the William E. Ward House, has been on the National Register since 1976.
Permits & rebuilding
Do flood repairs in Rye Brook need permits and inspections before power is restored?
Yes, and some come before the systems go back on. Every electrical repair after a flood must be permitted and inspected by the village’s electrical inspection agency before re-energizing, and gas heating and hot water repairs need a permit and a check by the village plumbing inspector. Rebuilding in a flood zone also needs a floodplain development permit.
Before a Rye Brook rebuild
- Reach the Rye Brook Building Department at Village Hall, 938 King Street, (914) 939-0668, weekdays 8:30 a.m. to 4 p.m. (3:30 p.m. on Wednesdays).
- If Con Edison disconnected a flood-damaged service, an electrician with a Westchester County license has to make the repairs.
- Pull the right forms from the permit applications page: plumbing, HVAC, electrical and floodplain development each have their own, and so do steep slope and wetlands work.
- Check your map: Rye Brook is NFIP community 360930, and its current FIRM panels took effect September 28, 2007.
- Finish with a Certificate of Occupancy or Compliance from the Building Department.
Services in Rye Brook
What kinds of damage do we repair in Rye Brook houses and offices?
Flooded basements and storm damage from Blind Brook, burst pipes and sewage backups, plus fire, smoke and mold damage. Offices on the Westchester Avenue corridor can use our commercial water damage restoration, and reconstruction stays with the same team from tear-out to the final finishes.
- Water Damage Restoration
- Fire Damage Restoration
- Smoke Damage Restoration
- Storm & Flood Damage Restoration
- Mold Remediation
- Sewage Cleanup
- Asbestos Abatement
- Lead Paint Removal
- Reconstruction After Damage
- Commercial Water Damage Restoration
- Commercial Fire Damage Restoration
- Restoration for Property Managers
- Estimating, Appraisal & Expert Witness
- Remodeling
FAQ
Rye Brook Questions
Why does Rye Brook flood when it has no shoreline?
Because Blind Brook runs through the village. Rye Brook’s 3.5 square miles are all land, so its floods come from the brook and from heavy rain, like the September 13, 2026 storm, when the village’s automated weather station logged 2.80 inches. The state’s Blind Brook study puts the Brook Lane neighborhood among its high-risk areas.
Should I remove the sewer trap cap to drain a flooded Rye Brook basement?
No. The village’s storm safety guidelines say never to remove sewer house-trap caps to drain floodwater. Have the water pumped out instead; we can extract it if you call (718) 357-9191. Rye Brook’s wastewater goes to Westchester County’s Blind Brook Sewer District, and Veolia, which the village calls its local water company, supplies the water.
Can I file Rye Brook permits online, or only on paper?
Yes, through GovWell, and paper filing is still an option. The catch is consistency: trade permits for electrical, plumbing and HVAC work, and the certificate of occupancy, must be filed the same way as the original building permit. A job that starts on paper stays on paper. The Building Department at (914) 939-0668 can confirm.
Rye Brook has no train station. How do your crews get there?
By road. Rye Brook Village Hall at 938 King Street is about 7.4 road miles from our office at 111 Calvert Street in Harrison, around 13 minutes of driving on clear roads, or just under five miles in a straight line. The Hutchinson River Parkway, I-287 and I-95 all pass through the village.
Nearby
What other towns near Rye Brook can call us?
Rye Brook and Port Chester are both villages in the Town of Rye and share the 10573 ZIP code, and about 30% of Rye Brook lies in the Port Chester-Rye school district. Blind Brook carries on from the village into the City of Rye. Those towns, Greenwich across the state line and White Plains each have a page below.
Talk to Strongwater
Flooded basement in Rye Brook?
Call (718) 357-9191. We drive in from Harrison, about seven road miles from Village Hall.